• Announcements

    • Mixdoctor

      IF YOU THINK YOU COULD HELP MODERATE ON THIS FORUM   01/22/2017

      Hi Everyone,   This Announcement has been put together for us by @Mikman001 and I would like to say a personal THANK YOU to him for putting this post together for our Forum.   OK , So You Want To Be A Moderator On This Site And Possibly On Another As Well.   Well some things to remember .... We do Need the help ... BUT read on >>>>   1: You must be active ( MOST IMPORTANT !!! ) We NEED the help . 2: You need to be DEDICATED even if you don't know , Flag someone else . 3: It would also be a vote between us MODS and ADMINS ( Must Be Approved By Both ) 4: You MUST have experienced KNOWLEDGE of builds and Kodi itself .  5: Have absolutely NO warnings or banned from other sites ( unless ligit ) 6: Must be courteous ( Never Get Upset With A Question No Matter The Issue ) 7: NO Private Help , All must be in forum to help others with same issue . ( Can't stress this enough  ) 8: You will also need to have knowledge of Moderator Tools ( We Will Teach And Help You ) 9: Also must Promote and Support The Beast Add-on, The Forum and anything else on the site here. 10: There Will Be a probation period for 1 Month, as to see if your active and helping .   If you think you have these qualities Please Apply and we will be back to you asap as
      The Mixdoctor or Myself have times we need to be off and unable to be here.     The most important skill you could have is be here and help best you can, when you can....     Thanks for reading @Mikman001 and @Mixdoctor   <<<<<<<<<<<<<<<<<<<<<<PLEASE APPLY BY CLICKING HERE >>>>>>>>>>>>>>>>>>>>>>
    • Mixdoctor

      THE BEAST JANUARY 23rd UPDATE & INSTALLATION VIDEO 🔥🔥🔥   01/23/2017

      The Beast January 23rd Update GET IT NOW 🔥🔥🔥 Hi Everybody, Yes we have updated the beast yet again and everything is working perfectly 👌👍 Again a big THANK YOU to all our team especially @ChrisB and @Tech Timeruuu PLEASE NOTE This build is for Kodi 16.1 Jarvis only, please see other Post Called The Beast Estuary Build for use with Kodi 17 ONLY. Or Click HERE REMEMBER TO VERIFY YOUR EMAIL! I hate typing in CAPS but a lot of people forget this small step.

      The U.K. server is: http://thebeast1.com
      The U.S. server is: http://thebeast2.com

      As always please register here: http://thebeast1.com/ and use the following repo: http://thebeast1.com/repo

      Backup server here: http://thebeast2.com/ and use the following repo: http://thebeast2.com/repo    CHECK OUT OUR NEW YOUTUBE CHANNEL BY CLICKING HERE    😎The Mixdoctor 😎 Team Member of forum.place & Extreme Kodi Testing ( Check us out too )    You Can Now Follow Me On Twitter https://twitter.com/Kodi_Mixdoctor
        CHECK OUT OUR LATEST SITE  Stream Help http://streamhelp.org  If We Or This Forum Has Helped You Please Consider Donating To Keep All Videos And Forums Up To Date And Active As The Server Costs Are Great  Remember Click Around The Adverts As This Also Helps Pay For Server Costs Thank You  And Have A Great Day 🏵  KODI DISCLAIMER
      We are not connected to or in any other way affiliated with Kodi, Team Kodi, or the XBMC Foundation. The 3rd Party addons are not the property of Kodi.tv and not supported by them. Third party addons will not receive any support in official Kodi channels, including the Kodi forums and various social networks  
    • Mixdoctor

      THE BEAST ESTUARY BUILD JANUARY 23rd FOR KODI 17 ONLY 🔥🔥🔥   01/23/2017

      The Beast Estuary Build January 23rd Update FOR KODI 17 ONLY GET IT NOW 🔥🔥🔥 Hi Everybody, Yes we have updated the beast yet again and everything is working perfectly 👌👍 Again a big THANK YOU to all our team especially @ChrisB and @Tech Timeruuu PLEASE NOTE This build is for KODI 17 only, please see other Post Called The Beast January 23rd Update for use with Kodi 16.1 Jarvis. Or Click HERE REMEMBER TO VERIFY YOUR EMAIL! I hate typing in CAPS but a lot of people forget this small step.

      The U.K. server is: http://thebeast1.com
      The U.S. server is: http://thebeast2.com

      As always please register here: http://thebeast1.com/ and use the following repo: http://thebeast1.com/repo

      Backup server here: http://thebeast2.com/ and use the following repo: http://thebeast2.com/repo BELOW IS THE VIDEO ON HOW TO INSTALL AND REGISTER ON THE WIZARD, It shows you The Beast January 23rd Update but all you need to do is when you run the wizard just chose The Estuary version to install, all other information in this video you need to follow.     THIS VIDEO BELOW SHOWS YOU WHAT The Beast Estuary Build IS ALL ABOUT        CHECK OUT OUR NEW YOUTUBE CHANNEL BY CLICKING HERE    😎The Mixdoctor 😎 Team Member of forum.place & Extreme Kodi Testing ( Check us out too )    You Can Now Follow Me On Twitter https://twitter.com/Kodi_Mixdoctor
        CHECK OUT OUR LATEST SITE  Stream Help http://streamhelp.org  If We Or This Forum Has Helped You Please Consider Donating To Keep All Videos And Forums Up To Date And Active As The Server Costs Are Great  Remember Click Around The Adverts As This Also Helps Pay For Server Costs Thank You  And Have A Great Day 🏵  KODI DISCLAIMER
      We are not connected to or in any other way affiliated with Kodi, Team Kodi, or the XBMC Foundation. The 3rd Party addons are not the property of Kodi.tv and not supported by them. Third party addons will not receive any support in official Kodi channels, including the Kodi forums and various social networks
Tech Timeruuu

Having issues registering?

14 posts in this topic

support-750x422.png

Wizard Help with TeamViewer

Please install TeamViewer first: http://www.teamviewer.com/en/download/windows/

Once you have TeamViewer installed in your PC send me your User ID and Password at techtimeruuu@gmail.com and I will connect and walk you through.

Please allow us some time in advance to make time and schedule a meeting with you.

We do not charge you for this support*

1 person likes this

Share this post


Link to post
Share on other sites

Hi Tech Timmeruu. I did have a probem with launching the wizzard. I did watch your video and followed your instructions but I still could not launch it. I have noticed other people had the same problem. My problem was that the confirmation email was sent to my junk box. I thought I would mention this to you as I can see there is a lot of posts about it not registering.

Kind Regards,

 

Kev 

Share this post


Link to post
Share on other sites
On 3/5/2016 at 6:16 PM, K3V said:

Hi Tech Timmeruu. I did have a probem with launching the wizzard. I did watch your video and followed your instructions but I still could not launch it. I have noticed other people had the same problem. My problem was that the confirmation email was sent to my junk box. I thought I would mention this to you as I can see there is a lot of posts about it not registering.

Kind Regards,

 

Kev 

Please read my post above and you will see that I'm here to help you guys via teamviewer, you just have to let me know when you're available.

Share this post


Link to post
Share on other sites

Good day Tech Timeruuu I have attempted to get the beast but the username password stops me 

I evidently register onsite recieved my email got my confirmation yet still it wont let I run the wizard

I even use configure put in email and password and it still wont let mi run the wizard what link or way may we get the wizard working so we may  may enjoy the update ..

Share this post


Link to post
Share on other sites

OK Guys,

I have literally just come into my office after loading 3 Fire Sticks with no problems what so ever so I am not sure why people are still having problems as it's working flawlessly here and also @Tech Timeruuu is also reporting no problems his end.

OK I am downloading my wizard from this http://wizard.place/repo  Configuring it with my registration email and password. BTW when registering on the wizard page PLEASE DO NOT use any characters or symbols in your credentials as this will defiantly cause you problems OK.

After configuring my wizard I then run it and download my version I want to install. I have tonight installed Encore and The latest beast so again I can see no problems our end at all.

Make sure if your in the U.K. your ISP is not blocking you. For more information on ISP blocking click post below ok.

The Mixdoctor B| Moderator of Spartanpixel and Extreme Kodi Testing
                                                                                   Check us out too.

If we or this forum has helped you please consider donating to keep all videos
and forums up to date and active as the server costs are great ..

Remember click around the adverts as this also helps pay for server costs

Thank you :)

Share this post


Link to post
Share on other sites

if you're on bt,turn off smart setup on the hub.I had problems for ages but this solved it instantly.......

Share this post


Link to post
Share on other sites
4 hours ago, NorthStar7200 said:

if you're on bt,turn off smart setup on the hub.I had problems for ages but this solved it instantly.......

Or any other UK ISP please click on post below.

The Mixdoctor B| Moderator of Spartanpixel and Extreme Kodi Testing
                                                                                   Check us out too.

If we or this forum has helped you please consider donating to keep all videos
and forums up to date and active as the server costs are great ..

Remember click around the adverts as this also helps pay for server costs

Thank you :)

Share this post


Link to post
Share on other sites

There seems to be an issue with the registration page as it comes up as not found at the moment, are there issues on the spartanpixel.net site at the moment?

Share this post


Link to post
Share on other sites

Hi, First time in this forum but I have been using the beast build for a long time now. In the last few months I have helped other friends install on to their fire sticks but that was using a different url to now. I have tried inputting the  http://wizard.place/repo url in to the file manager but it keeps saying it can't retrieve directory information. I am definitely connected to the network and have no isp issues. Is that url having problems? Many thanks for all the time and effort you guys put in and any help you can give me. Alex 

Edited by LexAnda
Typos

Share this post


Link to post
Share on other sites

I just tried going to file manager add source typed in  http://wizard.place/repo/ in the top url and left it as repo in the name 

and it went no prob. then go to addons / install from zip / (select) repo / (then select) the wizard and installs no prob.

Works fine here , Maybe make sure it's typed right  

Share this post


Link to post
Share on other sites
5 hours ago, Mikman001 said:

I just tried going to file manager add source typed in  http://wizard.place/repo/ in the top url and left it as repo in the name 

and it went no prob. then go to addons / install from zip / (select) repo / (then select) the wizard and installs no prob.

Works fine here , Maybe make sure it's typed right  

Welcome back to forum m8, this is such an ongoing problem buddy lol

The Mixdoctor B| Moderator of Spartanpixel and Extreme Kodi Testing
                                                                                  Check us out too.

 you can now  follow me on Twitter https://twitter.com/Kodi_Mixdoctor

If we or this forum has helped you please consider donating to keep all videos
and forums up to date and active as the server costs are great ..

Remember click around the adverts as this also helps pay for server costs

Thank you :)

Share this post


Link to post
Share on other sites

hi everyone!  I'm having issues dowloading wizard to my firestick. I registered and did everything but when i go to wizard it keeps saying im not validadet please help!

Share this post


Link to post
Share on other sites

Follow this post below and when you watch make sure you follow the registration tutorial to the T buddy. Also please remember when registering only use letters and numbers in your credentials and NO SYMBOLS what so ever apart from "@" in your email ok.

Read post and follow below please

The Mixdoctor B| Moderator of Spartanpixel and Extreme Kodi Testing
                                                                                  Check us out too.

 you can now  follow me on Twitter https://twitter.com/Kodi_Mixdoctor

If we or this forum has helped you please consider donating to keep all videos
and forums up to date and active as the server costs are great ..

Remember click around the adverts as this also helps pay for server costs

Thank you :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now